Showing 1 - 12 of 56 Items
Moisture is the enemy of electrical parts. Excessive moisture can cause switches to fail, and corrode wire connections, terminals and connectors. Penetrating spray with added rust inhibitor cuts through water to displace moisture in electrical systems. It cleans away corrosion to help restore correct current flow, and imparts a waterproof film that locks out moisture to protect parts and prevent future corrosion and electrical discharge.
This portable, non-acid coil cleaner works on both air conditioning and refrigeration coils, as well as dryer coils. It blasts deep into the coils to loosen and remove grease, dirt, lint and grime. This improves system efficiency and reduces energy consumption. It requires no rinsing, is low odor and safe for all metal tubular fins
Environmentally friendly, non-phosphate product for all purpose cleaning and degreasing. This water based yellow-green liquid contains a powerful natural solvent extracted from a renewable resource - citrus fruits. It provides effective cleaning and degreasing power without hazards or safety concerns because it contains no petroleum distillates, acid or chlorinated solvents. It is an effective alternative to caustic and butyl cleaners. This organic formulation offers a new approach in cleaning and degreasing being fully biodegradable and of exceptional low toxicity. Dilution strength can be matched to soil conditions to provide a wide range of cleaning power. 1:100 Light Duty Cleaning 1:50 Medium Duty Cleaning 1:10 Heavy Duty Cleaning Use full strength for extra tough degreasing.
Rapidly effective, low odor, non-fuming high-sudsing acid base detergent for a variety of cleaning and descaling operations. This concentrated product may be used undiluted for severe encrustations of scale, mineral deposits, and alkaline matter, or diluted with water for economical removal of hard water formations, soap scum, corrosion, lime build-up, or mortar splatters.
Durable clay-based coating that covers unsightly ceiling tile stains caused by water damage, smoke, and soil discoloration, eliminating the need for tile replacement. Unlike paint, this special restorer does not change the acoustical properties of the ceiling tile. Effective on both smooth and rough tile surfaces. Includes special vertical application actuators that enables you to spray without removing tile, spray around A/C vents, sprinkler heads or in corners. For use in office buildings, schools, hospitals, nursing homes, and apartment buildings.
EP75 is a graffiti remover formulated with environmentally preferable ingredients. EP75 has low VOC’s (Volatile Organic Compounds), all ingredients are biodegradable* and there is no Methylene Chloride and no 2-Butoxyethanol. EP75 will work fast and it will effectively jremove spray paints, markers, and ink from both exterior and interior surfaces. EP75 is ideal for use on cement, brick, ceramic walls, metal lockers, desks, and other hard surfaces.
A completely water soluble product for exceptional degreasing and cleaning of a wide variety of surfaces. It requires no solvent and is non-flammable. It rinses well and leaves no film or offensive odours. ACII Degreaser is ideally suited for degreasing and cleaning engines, “off road” equipment, concrete floors and white-wall tires.
Carburetor and automatic choke cleaner removes gum, grease, sludge, and varnish deposits to help reduce fuel consumption, improve acceleration and assure quick starts. Designed to be applied with carburetor in place to eliminate expensive disassembly time; cools automatic chokes for fast adjustment. Specialized formulation is harmless to oxygen sensors and catalytic converters. Increases the life of pistons, rings, and cylinder walls. Also ideal for use on manifold heat control valves, PCV valves, vacuum pistons, and thermostatic coils.
High tack lubricant that penetrates deep into gear teeth and cable before thickening to a heavy black stringy lubricant. Creates a Molybdenum Disulfide shield, which maintains a cushion of lubricant between gear teeth and other friction producing surfaces.
Heavy duty finish remover designed to tackle the most heavily fortified zinc and styrenated based floor finishes. Strip-X is a low odor ammonia free stripper safe to be used on most hard surfaces.
Molybdenum Disulfide or “moly”-based dry film lubricant and anti-seize coating. Sprays a dry film lubricant suited for use in dirty or dusty atmosphere
Quick drying, non-conductive coating protects electrical equipment from corrosion by guarding against exposure to chemicals, oil, and moisture. Helps prevent current leakage, short circuiting and flash-off ensuring optimal efficiency. High dielectric and arc resistance. Highly effective as a finish coat, the formulation dries fast to a tough, glossy, flexible coating that resists cracking and chipping. Strengthens and repairs worn-out and damaged insulation.